Jesmonite Acid Etch Solution - 200g (Suitable For AC730 Based Materials)

Name: Jesmonite Acid Etch Solution - 200g (Suitable For AC730 Based Materials)
Brand: Jesmonite

Jesmonite

Item Details \n\nItem\nJesmonite Acid Etch For AC730\n\nSize\n200g\n\nInformation\n\nA treatment for concrete surfaces, removes cement-rich film to expose decorative aggregate finishes in fine decorative systems. Used as a powerful surface cleaner for brickwork, concrete and paving, removing efflorescence and dirt as a pre-treatment it can be used on concrete surfaces to improve adhesion prior to applying an appropriate floor coating. \nDecorative Etching\nAllow system to cure for a minimum of 24 hours before treatment. Wet surface with water prior to application to avoid marking / burning of surface, apply with soft brush. Varying degrees of etching can be achieved from 1 to 4 minutes of application. Repeat as required. Wash surface with lots of clean water to stop etching effect. \nCleaning / Pre-treatment\nConcrete surfaces should be clean and degreased before application. Apply evenly by soft brush and allow time to react. Two or more applications may be re.